Economy Gloss Meter

मूल्य/उद्धरण प्राप्त करें

उत्पाद विवरण:

Click to view more
Share Your Product:

Request To Call Back जांच भेजें

उत्पाद विवरण

As an Authorized dealer we are engaged in providing the broad assortment of wide gamut of ColourAppearance test and measurement instruments.

Gloss meter features with 60 ° angle, manufactured according to ISO2813 and GB/T 9754. It is also compatible with international standards of ASTM D523, ASTM D2457. HG60S economic gloss meter conforms to JJG696 first class gloss meter working requirement, corresponding with CIE 1931(2 °) under CIE C light source.

Gloss meter is widely used to test glossiness in these industries, such as automobile, paint, ink, stoving varnish, coating, wood products; marble, granite, vitrified polished tile, pottery brick and porcelain; plastic, paper; hardware industries, etc.

Features:

60 ° angle for semi gloss
Concise appearance, feel good
Display 5 sets of measurement data, good for comparison
Built-in lithium ion rechargeable battery
Basic model measurement can meet basic glossiness testing requirements
One button for all angles measurement at the same location
Comply with international standards
Stable performance, easy to read data.

Specifications:

Economic Gloss Meter
Measuring Angle	60° Comply with standard ISO 2813, GB/T 9754, ASTM D 523, ASTM D 2457
Measuring Area (mm)	9x15
Measuring Range	0~200GU
Division Value	1GU
Measurement Range Repeatability Reproducibility	0-200GU ±1GU ± 1GU
Measurement Standard	Conform with JJG696 first class gloss meter working requirement
Chromaticity Corresponding	Corresponding with CIE 1931(2°) under CIE C light source
Errors	±1.5 , ± 1.5%
Measuring Time	0.5s
Dimension	LWH : 160mm75mm90mm
Weight	350g
Battery	3200mAh Li-ion Battery, >10000 times(within 8 hours)
Display	TFT 3.5 inch
Interface	USB/RS-232
Storage	Basic mode: 1000
Software	/
Operation Temperature	0~40 Deg.C,32~104°
Storage Temperature	-20~50Deg.C,-4~122°Deg.C
Humidity	<85% relative humidity, no condensation
Standard Accessories	Power Adapter, USB cable, User Manual, Calibration Plate
Optional Accessories	Miniature Printer
Note	The specifications are subject to change without notice.

LCD Screen: Display measuring data and instrument operation navigation.

Switch/Measure button: Long-press the button 3 seconds to turn on or turn off the gloss meter. Short press the button is to measure.

Indicator Light: When turning on, it will show green light. After startup, the light is off. Low power and charging status will show red light. Fully charged will show green light.

RS-232/USB interface: This interface is a common interface. The instrument automatically judges the connection status. USB interface is used to connect transfer data to PC. RS-232 interface is used to connect to the printer. USB cable can connect power adapter and computer for charging the gloss meter (specification for external adapter is: 5V=2A).

Protective Cover (Calibration plate): It is to protective the measuring aperture. Built-in calibration plate is used for instrument calibrating. Attention: The method to separate the protective cover from the instrument is shown in figure 2. Hold the instrument with one hand, the other hand hold the protective cover, and then separate it according to the Open mark. You only need to separate it from one side. Do not separate it from two sides.